Magnetically-driven heat transport device using a binary temperature-sensitive magnetic fluid

The magnetic body force in boiling two-phase temperature-sensitive magnetic fluid (TSMF) flow is known to effectively increase the driving force of magnetic fluid in a non-uniform magnetic field. Based on this mechanism, in the present study, a binary TSMF, which is a mixture of the TSMF and a low-boiling-saturation-temperature organic solution, is proposed to be used in a heat transport device to enhance its circulation. In order to see its performance in the heat transport device, the pressure difference at different heated temperatures, magnetic fields and inclination angles of the heating section are investigated experimentally and theoretically. Results showed that the driving force increases remarkably due to more gas phase appearing in the test fluid and the magnetization of it decreasing. At low magnetic field the driving force is enhanced greatly when the inclination angle is close to 60°, while at high magnetic field the driving force is remarkably enhanced due to the effect of the magnetic force in the inclination angle range from 0° to 30° and 60° to 90°.     

Comparison of several models for multi-size bubbly flows on an adiabatic experiment

This paper deals with the modelling and numerical simulation of isothermal bubbly flows with multi-size bubbles. The study of isothermal bubbly flows without phase change is a first step towards the more general study of boiling bubbly flows. Here, we are interested in taking into account the features of such isothermal flow associated to the multiple sizes of the different bubbles simultaneously present inside the flow. With this aim, several approaches have been developed. In this paper, two of these approaches are described and their results are compared to experimental data, as well as to those of an older approach assuming a single average size of bubbles. These two approaches are (i) the moment density approach for which two different expressions for the bubble diameter distribution function are proposed and (ii) the multi-field approach. All the models are implemented into the NEPTUNE_CFD code and are compared to a test performed on the MTLOOP facility. These comparisons show their respective merits and shortcomings in their available state of development.     

A multigrid approach for steady state laminar viscous flows

In this paper, we use the laminar viscous flow in a lid‐driven cavity as an example to describe and verify a numerical scheme for non‐linear partial differential equations. The proposed scheme combines a new analytical method for strongly non‐linear problems, namely the homotopy analysis method, with the multigrid techniques. A family of formulas at different orders is given. At the lowest order, the current approach is the same as the traditional multigrid methods. However, our high‐order scheme needs a fewer number of iterations and less CPU time than the classical ones. Copyright © 2001 John Wiley & Sons, Ltd.     

Optimal Control for an Obstruction Problem

A question of flow around an obstacle leads to an optimal control problem. If an optimum path exists, then it is calculable from the Pontryagin principle. The optimum is verified to be reached, using a discretization of the problem.     

Numerical Approaches to Optimal Control of a Model Equation for Shear Flow Instabilities

We investigate two different discretization approaches of a model optimal-control problem, chosen to be relevant for control of instabilities in shear flows. In the first method, a fully discrete approach has been used, together with a finite-element spatial discretization, to obtain the objective function gradient in terms of a discretely-derived adjoint equation. In the second method, Chebyshev collocation is used for spatial discretization, and the gradient is approximated by discretizing the continuously-derived adjoint equation. The discrete approach always results in a faster convergence of the conjugate-gradient optimization algorithm. Due to the shear in the convective velocity, a low diffusivity in the problem complicates the structure of the computed optimal control, resulting in particularly noticeable differences in convergence rate between the methods. When the diffusivity is higher, the control becomes less complicated, and the difference in convergence rate reduces. The use of approximate gradients results in a higher sensitivity to the degrees of freedom in time. When the system contains a strong instability, it only takes a few iteration to obtain an effective control for both methods,even if there are differences in the formal convergence rate. This indicates that it is possible to use the approximative gradients of the objective function in cases where the control problem mainly consists of controlling strong instabilities. This revised version was published online in July 2006 with corrections to the Cover Date.     

更新过程理论在交通流上的一个应用

一个更新过程的两个随机变量的分布:间隔分布、计数分布是1—1对应的,但由间隔分布求对应的计数分布的问题尚未很好地解决。在道路断面观测交通流可得到一更新过程,车头时距和车辆到达分别是其间隔和计数。时距分布容易观测得到,而到达分布的观测却较难。因此上述数学问题的解决对交通流理论是非常有意义的,本文将研究之。     

Some exact solutions of the oscillatory motion of a generalized second grade fluid in an annular region of two cylinders

The velocity field and the associated shear stress corresponding to the longitudinal oscillatory flow of a generalized second grade fluid, between two infinite coaxial circular cylinders, are determined by means of the Laplace and Hankel transforms. Initially, the fluid and cylinders are at rest and at t = 0＋ both cylinders suddenly begin to oscillate along their common axis with simple harmonic motions having angular frequencies Ω1 and Ω2. The solutions that have been obtained are presented under integral and series forms in terms of the generalized G and R functions and satisfy the governing differential equation and all imposed initial and boundary conditions. The respective solutions for the motion between the cylinders, when one of them is at rest, can be obtained from our general solutions. Furthermore, the corresponding solutions for the similar flow of ordinary second grade fluid and Newtonian fluid are also obtained as limiting cases of our general solutions. At the end, the effect of different parameters on the flow of ordinary second grade and generalized second grade fluid are investigated graphically by plotting velocity profiles.     

Investigation and application of point implicit Runge–Kutta methods to inviscid flow problems

We derive and investigate point implicit Runge–Kutta methods to significantly improve the convergence rate to approximate steady‐state solutions of inviscid flows. It turns out that the point implicit Runge–Kutta can be interpreted as a preconditioned explicit Runge–Kutta method, where the preconditioner arises naturally as local derivative of the residual function. Moreover, many preconditioners suggested in the literature so far are identified as special case of our general ansatz. Conditions will be formulated such that explicit Runge–Kutta methods with local time stepping are equivalent to point implicit methods. In numerical examples, we will demonstrate the improved convergence rates. Copyright © 2011 John Wiley & Sons, Ltd.     

Accuracies and conservation errors of various ghost fluid methods for multi-medium Riemann problem

Since the (original) ghost fluid method (OGFM) was proposed by Fedkiw et al. in 1999 [5], a series of other GFM-based methods such as the gas–water version GFM (GWGFM), the modified GFM (MGFM) and the real GFM (RGFM) have been developed subsequently. Systematic analysis, however, has yet to be carried out for the various GFMs on their accuracies and conservation errors. In this paper, we develop a technique to rigorously analyze the accuracies and conservation errors of these different GFMs when applied to the multi-medium Riemann problem with a general equation of state (EOS). By analyzing and comparing the interfacial state provided by each GFM to the exact one of the original multi-medium Riemann problem, we show that the accuracy of interfacial treatment can achieve “third-order accuracy” in the sense of comparing to the exact solution of the original mutli-medium Riemann problem for the MGFM and the RGFM, while it is of at most “first-order accuracy” for the OGFM and the GWGFM when the interface approach is actually near in balance. Similar conclusions are also obtained in association with the local conservation errors. A special test method is exploited to validate these theoretical conclusions from the numerical viewpoint.     

Free surface Stokes flows obstructed by multiple obstacles

Gravity‐driven Stokes flow down an inclined plane over and around multiple obstacles is considered. The flow problem is formulated in terms of a boundary integral equation and solved using the boundary element method. A Hermitian radial basis function (RBF) is used for the interpolation of the free surface, generation of the unit normal and curvature, and to prescribe the far‐field conditions. For flow over an obstacle, hemispheres are taken. For flow around an obstacle, circular cylinders are modelled and the contact angle condition on the obstacle/free surface intersection specified using the RBF formulation. Explicit profiles are produced for flow over and around two obstacles placed in various locations relative to one another. Interaction due to two obstacles is given by comparisons made with the profiles for flow over and around individual obstacles. In general, when the obstacles are separated by a sufficiently large distance the flow profiles are identical to a single obstacle analysis. For flow over and around two obstacles in‐line with the incident flow, effects of the governing parameters are examined, with variations in plane inclination angle, Bond number, obstacle size, and in the case of obstacles intersecting the free surface, static contact angle is considered. Finally flows over and around three obstacles are modelled. Copyright © 2009 John Wiley & Sons, Ltd.